米粉切割机传动及切割部分设计
摘 要
本次毕业设计课题是米粉切割机的设计，主要设计思路是：利用切刀与米粉的相对运动，借助于切刀的剪切或切削作用把米粉切断。米粉的切断对产品的内在质量影响不大，但对于干粉头量的增减关系极大，驱动装置采用三相异步电动机，其传动方案为：电动机—皮带轮—主轴—刀片，设计过程中主要是对V带计算，刀片的分析，电动机、V带、主轴、轴承的选择。本次毕业设计是专业课程的理论学习和实践之后的最后一个教学环节，通过本次设计对所学专业课程的理论加以综合并增加生产实践知识，经过连续冷弯成型机设计的实际训练，从而培养和提高个人独立工作的能力。巩固与扩充了机械设计相关课程内容，掌握其设计的方法和步骤。在设计中查阅了大量的机械书籍，在此过程中锻炼并提高了机械设计的基本技能，如计算、绘图、查阅设计资料和手册；熟悉机械设计标准及其它有关的标准和规范，并在设计中加以贯彻，对今后的工作与学习打下了坚实的基础
关键词：切割 刀片 传动
cutting-off machine of rice noodles
Abstract: The graduation project is the subject for cutting-off machine of rice noodles ,the main designing idea :Make use of the relative motion of cutter and rice noodles ,by means of shearing or cutting action ,make rice noodles cut-off.Driven installations in three-phase asynchronous motor, its drive for the programme: Motor-pulleys-shaft-circular saw blade. The design process of V-belt calculations, analyze circular saw blade ,choose motor ,V-belt, shaft, bearing.
The design is a professional graduate course after the study of theory and practice of teaching, it is the last part of this through the design of the theory of professional courses to be comprehensive and practical knowledge to increase production, after continuous cold-formed machine design of the actual training, Developing and enhancing the ability of individuals to work independently. Consolidation and expansion of the "cutting-off machine of rice noodles" related to the course content, its design master the methods and steps. In the design of a large number of mechanical inspection of books, in the course of training and improved mechanical design of the basic skills, such as computing, graphics, access to design information and manuals; familiar with the mechanical design standards and other relevant standards and norms and in the design Implement in the future of work and learning to lay a solid foundation
Key words: cutting blade drive
目 录
1 绪 论 1
2 切断设备 2
2.1 切断器技术要求及原理 2
2.1.1 切断器技术要求： 2
2.1.2 切断的原理 2
2.2 切割器的类型 2
2.3 切割对切刀的要求 4
2.3.1 钳住条件 4
2.3.2 切割角度 5
2.3.3 圆盘锯锯片 6
3 传动部分 9
3.1 电动机的选择 9
3.2 V带的计算和参数选择 10
3.3 V带带轮的计算和参数选择 12
3.4 轴的设计 13
3.5 轴承的选择、校核 15
3.5.1 滚动轴承疲劳寿命计算： 16
3.5.2 支承部件的结构设计 17
4 参 考 文 献 18
5 致 谢 19
参 考 文 献
[1] 于永泗，齐明主编.机械工程材料.大连:大连理工大学,2003
[2] 曾志新, 吕明编.机械制造技术基础.武汉理工大学出版社, 2001
[3] 徐灏,邱宣怀,蔡春源,汪恺,余俊.机械设计手册1-5.机械工业出版社,1991
[4] 杨明忠,朱家诚.机械设计.武汉理工大学出版社,2006
[5] 谭建荣，张树有，陆国栋，施岳定编.图学基础教程.高等教育出版社,2004
[6] 刘鸿文编.材料力学.高等教育出版社.2004
[7] 傅晓如编.米粉条生产技术.金盾出版社.1999
[8] 邓星钟编.机电传动控制.话中科技大学出版社(第三版)2007
[9] 邵少新,夏素民,孙江宏编.Pro/ENGINEER Wildfire 3.0中文版.清华大学出版,2007
[10] 薛焱,王祥仲编.中文版AutoCAD 2004基础教程,清华大学出版社,2006
http://www.bysj360.com/ http://www.bysj360.com/html/5215.html http://www.bylw520.net
