齿轮轴三维建模与加工工艺的设计(说明书+cad图纸+三维)

齿轮轴三维建模与加工工艺的设计(说明书+cad图纸+三维)

齿轮轴三维建模与加工工艺的设计(说明书+cad图纸+三维)

  • 适用:本科,大专,自考
  • 更新时间2024年
  • 原价: ¥290
  • 活动价: ¥200 (活动截止日期:2024-03-31)
  • (到期后自动恢复原价)
齿轮轴三维建模与加工工艺的设计(说明书+cad图纸+三维)

齿轮轴三维建模与加工工艺

摘要:毕业设计是我们结合三年所学的知识,再通过查询大量软件设计出来的第一个作品,培养了我们独立的能力也培养了动手的能力。齿轮轴是支承转动零件并与之一起回转以传动运动、扭矩和弯矩的机械零件,本文讲述了齿轮轴的设计,首先确定加工毛坯,确定加工路线等工艺分析,利用CAD、UG辅助完成对图形的描述,利用UG后处理表达出加工程序。
关键字:工艺分析,加工路线,切削用量,三维建模,加工编程

 

Three dimensional modeling and processing technology of gear shaft
Abstract: Graduation design is the first achievement under the combination of three years of knowledge and through consulting a large number of software, which cultivated our ability of independently and cultivated our manipulative ability. Gear shaft is the supporting rotating parts and with rotating together to drive motor, torque and bending moment of mechanical parts, this paper describes the design of gear shaft, first determine the rough machining, determine the processing route etc. process analysis, the CAD, UG auxiliary graphics was described, using UG post-processing express processing program.
Key words: Process analysis, machining route, cutting parameters, 3D modeling, machining programming

 

 


目录
   
第一章  序言 7
1.1 课题研究的目的和意义 7
1.2 齿轮轴的参数化研究现状 7
1.3齿轮轴主要参数 7
1.4 UG软件概述 8
第二章  零件的工艺设计 9
2.1零件图纸的完善 9
2.2 零件图纸的分析 10
2.3 零件加工的顺序 10
2.4 零件的基准 11
2.5 配合参数 12
2.6本章小结 12
第三章  参数的确定与计算 14
3.1 齿轮轴的毛坯尺寸 14
3.2 刀具的选择 16
3.4 本章小结 18
第四章 齿轮轴加工与三维建模 19
4.1 手工加工编程 19
4.2 UG三维造型 21
4.3 数控编程 23
4.4 本章小结 27
结论 28
致谢 29
参考文献 30
毕业设计附录 31

参考文献
[1] 展迪优,UG NX9.0机械设计教程[M],械工业出机版社; 第4版
[2] 顾京  主编《数控机床加工程序编制》[M]  机械工业出版社
[3] 孙本绪 熊万武  主编《机械加工余量手册》[M]  国防工业出版社 1999年11月
[4] 华红芳 孙燕华 主编《机械制图与零部件测绘》[M] 电子工业出版社
[5] 《2002年车削刀具》[M] 2002年
[6] 《热轧圆钢规格、重量》(GB702-72) [M]

 

 

  • 关键词 三维 轮轴 建模 加工 工艺 说明书 +cad 图纸 +
  • 上一篇:基于UG的尾座体箱工艺及钻夹具工装设计
  • 下一篇:基于UG的并联机构底部支座的测绘建模与加工仿真
  • 暂无购买记录

    暂时没有评论

    真实

    多重认证,精挑细选的优质资源 优质老师。

    安全

    诚实交易,诚信为本。

    保密

    所有交易信息,都为您保密。

    专业

    10年专业经验,10年来帮助无数学子。