基于UG的并联机构底部支座的测绘建模与加工仿真

基于UG的并联机构底部支座的测绘建模与加工仿真

基于UG的并联机构底部支座的测绘建模与加工仿真

  • 适用:本科,大专,自考
  • 更新时间2024年
  • 原价: ¥290
  • 活动价: ¥200 (活动截止日期:2024-03-31)
  • (到期后自动恢复原价)
基于UG的并联机构底部支座的测绘建模与加工仿真

                      基于UG的并联机构底部支座的测绘建模与加工仿真
摘要
本文选择的题目基于UG的并联机构底部支座的测绘建模与加工仿真,针对并联机构底部支座进行三维模型的建模、加工工艺编制、数控加工NC程序的编制和仿真。
1、并联机构底部支座的三维造型
2、并联机构底部支座的加工工艺方案的分析
3、并联机构底部支座的加工NC编程以及仿真
本课题主要完成的是并联机构底部支座的测绘建模和加工仿真,并联机构的底部支座在整个机构中起固定支撑作用,它是连接固定的关键存在。并联机构的底部支座的意义在于支撑并联机构的运动,并使其固定于一定位置上。

关键词:底部支座;测绘建模;加工仿真;固定支撑
ABSTRACT
The topic based on UG parallel mechanism at the bottom of the bearing of the surveying and mapping modeling and processing simulation, for support at the bottom of the parallel mechanism of 3D modeling, machining process planning, NC program compiling and simulation.
1. three dimensional modeling of bottom seat of parallel mechanism.
2.Analysis on the processing technology of the bottom bearing of parallel mechanism
3.NC programming and Simulation of the bottom support of parallel mechanism
The main task of this paper is to complete the modeling and processing simulation of the bottom bearing of parallel mechanism. The bottom supporting seat of the parallel mechanism is fixed and supported in the whole mechanism. The significance of the bottom support of the parallel mechanism is to support the movement of the parallel mechanism, and fixed it in a certain position.

Key words: Bottom bearing, Modeling of Surveying and mapping, Processing simulation, Fixed support


目录
目录 2
摘要 4
ABSTRACT 5
第一章 绪论 6
1.1 数控加工概述 6
1.2 并联机构 6
1.3 并联机构的意义 7
1.4 课题研究的内容 8
1.5 论文的设计过程与要求 8
1.6 课题研究后所获得的成果 9
第二章 并联机构底部支座的加工工艺分析 10
2.1 编写并联机构底部支座的图样分析 10
2.2 并联机构底部支座的毛坯的选择 11
2.3 并联机构底部支座的工艺路线分析 11
2.4 并联机构底部支座的加工工艺基准及切削用量选择 11
2.5本章小结 12
第三章 底部支座的草图绘制 13
3.1 草图绘制使用的软件工具 13
3.2 底部支座草图的建立 13
3.3部分拉伸 14
3.4草图2的建立 16
3.5剩余草图的绘制 16
3.6本章小结 17
第四章 并联机构底部支座的拉伸及边倒圆 18
4.1拉伸命令 18
4.2底部支座的拉伸 18
4.3底部支座的边倒圆 21
4.4本章小结 22
第五章 底部支座的加工仿真和编程 23
5.1设置底部支座的加工坐标系 23
5.2设置加工几何体 23
5.3设置刀具 24
5.4设置加工方法 26
5.5生成数控孔加工刀轨 27
5.6生成数控粗加工刀轨 28
5.7生成半精加工刀具路线轨迹 29
5.8生成精加工刀具走刀路线 31
5.9孔加工CNC程序 34
5.10粗加工CNC程序 36
5.11精加工CNC程序 37
5.12本章小结 39
第六章 回顾总结 40
6.1课题成果 40
6.2存在的问题 40
6.3收获与体会 40
致谢 41
参考文献 42

参考文献
(1)张瑞萍、温玲娟.UG NX9.0中文版标准教程.北京:清华大学出版社
(2)邬哓强UG NX9.0完全自学手册.南京:电子工业出版社
(3)华红芳、孙燕华.机械制图与零部件测绘.高职教材:电子工业出版社
(4)陈宏钧、方向明典型零件机械加工生产实例.高职教材:机械工业出版社
(5)邹晔.典型数控系统及应用.北京:高等教育出版社

 

 


http://www.bysj360.com/cat.asp?id=22&page=8
http://www.bylw520.net/cat.asp?id=25&page=7

  • 关键词 UG 并联 机构 底部 支座 测绘 建模 加工 仿真
  • 上一篇:齿轮轴三维建模与加工工艺的设计(说明书+cad图纸+三维)
  • 下一篇:基于plc控制的柱坐标式香皂生产线搬运机械手三维建模仿真设计
  • 暂无购买记录

    暂时没有评论

    真实

    多重认证,精挑细选的优质资源 优质老师。

    安全

    诚实交易,诚信为本。

    保密

    所有交易信息,都为您保密。

    专业

    10年专业经验,10年来帮助无数学子。