洛氏硬度检测方法对材料性能检测的影响

洛氏硬度检测方法对材料性能检测的影响

洛氏硬度检测方法对材料性能检测的影响

  • 适用:本科,大专,自考
  • 更新时间2024年
  • 原价: ¥300
  • 活动价: ¥200 (活动截止日期:2024-03-30)
  • (到期后自动恢复原价)
洛氏硬度检测方法对材料性能检测的影响

          洛氏硬度检测方法对材料性能检测的影响
洛氏硬度检测方法对材料性能检测的影响
摘要:洛氏硬度测量是工业生产中常见的用于金属硬度检测的方法,洛氏硬度硬度操作较为简单,对工件产生的压痕相对较小,对工件的损伤较小,归于无损检测一类,可对成品直接进行测量,并且它的测量范围广,较为常用的就有HRA 、HRB、 HRC三种标尺可测量各种软硬不同,厚薄不同材料,本文通过对洛氏硬度,洛氏硬度实验方法的介绍和分析,以及与布氏硬度的对比,进一步的指出了洛氏硬度的应用以及适用范围,在应用中使洛氏硬度得到了了更好的改善和进步。
关键词:硬度检测;洛氏硬度检测;适用范围;
Rockwell hardness testmethods affect materialproperties test
Abstract: Rockwell hardness is measured in a common industrial process for the detection of metal hardness, Rockwell hardness hardness operation is simple,the indentation on the workpiece is relatively small,less damage to the workpiece, attributed to non-destructive testing of these categories,direct measurements of the finished product, and itswidemeasurement range, the more commonly used there HRA HRB HRC ruler to measure a variety of hardware and software in three different thickness of different materials,Based on the Rockwell hardness,Rockwell hardness test method introducedand analysis,and compared with the Brinell hardness,and further pointed out the application and scope of Rockwell hardness,Rockwell hardness of manipulation in the application got the better improvement and progress.
Key words: hardness test; Rockwell hardness test; Materials;Scope
目录
第一章 绪论…………………………………………………………………………………8
第二章 硬度常用检测方法介绍……………………………………………………………8
 2.1 金属材料硬度的定义…………………………………………………………………8
 2.2金属洛氏硬度检测方法的研究…………………………………………………………9
 2.3 硬度试验的作用和特点………………………………………………………………10
 2.4 硬度试验………………………………………………………………………………11
第三章  常见的硬度试验的作用和特点…………………………………………………12
 3.1 布氏硬度试验…………………………………………………………………………12
  3.1.1布氏硬度试验原理…………………………………………………………………12
 3.2 维氏硬度试验…………………………………………………………………………14
  3.2.1维氏硬度试验原理…………………………………………………………………14
第四章 洛氏硬度简介………………………………………………………………………15
 4.1洛氏硬度的硬度标准…………………………………………………………………16
 4.2洛氏硬度的实验原理…………………………………………………………………17
 4.3洛氏硬度的试样要求…………………………………………………………………23
  4.3.1按材料种类选择……………………………………………………………………23
  4.3.2按样品的硬度范围选择……………………………………………………………23
  4.3.3按厚度或硬化层深度………………………………………………………………24
 4.4 洛氏硬度试验方法以及影响…………………………………………………………24
 4.5洛氏硬度检测及注意事项……………………………………………………………26
第五章 洛氏硬度检测方法对材料性能的影响……………………………………………29
结论…………………………………………………………………………………………30
参考文献……………………………………………………………………………………31
参考文献
[1]宗斌,王二平,魏建忠.金属洛氏硬度常用标尺的选择与实践教学[J].试验时科学,2010 (1) : 95-97. 
[2]张泰华,杨业敏,纳米硬度技术的发展和应用,力学进展,2002, 32 (3 ):349364
[3]杨迪,李福欣编著,显微硬度试验,北京:中国计量出版社,1988, 1
[4]Cheng Yang-Tse, Cheng Che-Min. Scaling, dimension-al analysis and indentation measurements [J].M ateri- als Science and Engineering R,2004, 44: 91一149.
[5]杨迪.金属硬度实验【M].北京:中国计量出版社,1983.
[6]Bhushan B, Gupta B K.  Handbook of Tribology [M〕.New York:  McGraw-Hill,  1991.
[7]虞伟良.硬度测试技术的新动态与发展趋势【J].理化检验一物理分册,2003, 39(8):401一40

http://www.bysj360.com/  http://www.bysj360.com/html/4154.html   http://www.bysj360.com/html/2775.html


 

  • 关键词 检测 洛氏 硬度 方法 材料 性能 影响
  • 上一篇:泡沫镁合金的制备工艺分析
  • 下一篇:C型砂型硬度计显示方法改造
  • 暂无购买记录

    暂时没有评论

    真实

    多重认证,精挑细选的优质资源 优质老师。

    安全

    诚实交易,诚信为本。

    保密

    所有交易信息,都为您保密。

    专业

    10年专业经验,10年来帮助无数学子。