HSG工程液压缸设计及工艺编程
摘要:在满足需求的同时会更加看重设计本身,怎么设计出简单适用、成本较低的东西成了设计的关键。一件产品设计与加工是密不可分的,只有设计简单了才能加工简单,降低加工的成本。本设计以HSG工程液压缸作为研究对象,利用inventor完成本次的设计。Inventor在使用上来说还不是很广泛,但它就很多的优点,尤其在设计上而言,更加的简单化,使用起来也非常的方便 ,而且从三维模型转到二维零件图也比较的方便,传统工厂都还是在用CAD画二维图,但其实现在很多工厂已经开始再用inventor了,相信在未来它的使用也会更加的普遍,本次设计就是使用该软件完成液压缸的设计并出图。重点讲述了每一个零件上尺寸的来源与含义,完成设计,并根据零件图完成工艺分析,数控加工和程序编制。
关键字:设计、工艺分析、程序编制
Design and process programming of hydraulic cylinder in HSG engineering
Abstract: we will pay more attention to the design itself and how to design simple, applicable and low cost things to become the key of design. A product design and processing are inseparable, only the simple design can be simple processing, This design takes the HSG engineering hydraulic cylinder as the research object, and uses the mentor, inventor to complete this design. Inventor in the use of it is not very extensive, but it has many advantages, especially in terms of more simple design, is also very convenient to use, but also from the 3D model to 2D maps, but now many factories have beginning with inventor, I believe that in the future it will be more widely used. This design is to use the software to complete the design and drawing of the hydraulic cylinder. It focuses on the source and meaning of the size of each part, completes the design, and completes the process analysis, NC machining and programing according to the part drawing.
Key words: design, process analysis and programming
目录
第一章 绪论 1
1.1引言 1
1.2HSG 80-45/150的工程液压缸设计要领 1
1.3课题来源与意义 1
1.4 inventor软件的概述 2
1.5用料原则和成本问题 2
1.6本章小结 2
第二章 HSG 80-45/150工程液压缸的设计过程 4
2.1如何才能符合图纸的设计要求 4
2.2装配图 5
2.3零件图 6
2.4材料尺寸定义 12
2.5各类密封圈的使用 12
2.7本章小结 13
第三章 HSG 80-45/150工程液压缸数控加工工艺及数控加工程序编制 14
3.1数控加工工艺基础 14
3.2工艺过程 14
3.3工序过程 16
3.4本章小结 17
第四章 数控加工程序编制 19
4.1数控加工程序编制 19
4.2程序文件 19
4.3本章小结 20
第五章 课题总结与展望 21
5.1课题总结 21
5.2展望未来 21
致谢 22
参考文献 23
毕业设计附录 24
参考文献
[1] 杨良根 吴青松 何世松 主编《数控技术毕业设计指导》[M] 北京理工大学出版社
[2] 吴慧媛 韩邦华 主编《零件制造工艺与装备》[M] 北京:电子工业出版社,2010.2
[3] 顾京 主编《数控加工程序编制及操作》[M] 北京:高等教育出版社,第二版,2015.1
[4] 李华 主编《机械制造技术》[M] 北京:高等教育出版社,第四版,2015.7
[5] 王振宇 主编《数控加工工艺与CAM技术》[M] 北京:高等教育出版社,2016.