蒸汽滤阀片冷冲模设计

蒸汽滤阀片冷冲模设计

蒸汽滤阀片冷冲模设计

  • 适用:本科,大专,自考
  • 更新时间2024年
  • 原价: ¥307
  • 活动价: ¥200 (活动截止日期:2024-03-31)
  • (到期后自动恢复原价)
蒸汽滤阀片冷冲模设计

蒸汽滤阀片冷冲模设计
摘  要:本设计为一平板类零件的冷冲压模具设计,根据设计零件的尺寸、材料、批量生产 等要求,首先分析零件的工艺性,确定冲裁工艺方案及模具结构方案,然后通过工艺设计计算,确定排样和裁板,计算冲压力和压力中心,初选压力机,计算凸、凹模刃口尺寸和公差,最后设计选用零、部件,对压力机进行校核,绘制模具总装草图,以及对模具主要零件的加工工艺规程进行编制。其中在结构设计中,主要对凸模、凹模、凸凹模、定位零件、卸料与出件装置、模架、冲压设备、紧固件等进行了设计,对于部分零部件选用的是标准件,就没深入设计,并且在结构设计的同时,对部分零部件进行了加工工艺分析,最终才完成这篇毕业设计。
关键词:模具;冲裁件;凸模;凹模;凸凹模
Steam filter valve plate cold stamping die design
Abstract: The fiat for a plate of cold stamping die design, according to the size of the design components, materials, mass production, etc., the first part of the process of analysis to determine the blanking process planning and die structure of the program, and then through the process design calculations, determine the nesting and cutting board, calculate the pressure and pressure washed centers, primary presses, computing convex and concave Die Cutting Edge dimensions and tolerances, the final design selection of parts and components, to press for checking, drawing die assembly drawings, as well as Mold processing technology of the main parts to the preparation procedures. In which the structural design, primarily to the punch and die, punch and die, positioning parts, unloading and out of pieces of equipment, mold, pressing equipment, fasteners, etc. has been designed, for the selection of some components are standard parts, there is no in-depth design, and structural design, while some parts for the processing process analysis and ultimately to complete this graduation project.
Key words: mold; stamping parts; punch; die; punch and die;


目  录

第一章  绪论
1.1本课题的研究内容和意义   ………………………………………………………………………1
1.2国内外的发展概况 …………………………………………………………………………………1
1.3课题的主要内容  ………………………………………………………………………………… 3

第二章  冷冲压工艺分析
2.1冲压件介绍   ………………………………………………………………………………………4
2.2冲压的工艺性分析 …………………………………………………………………………………5
2.2.1冲裁件的结构工艺性 …………………………………………………………5
2.2.2冲裁间隙   ……………………………………………………………………7
2.3冲压工艺方案的确定 ………………………………………………………………………………9

第三章  冲压模具设计
3.1模具结构  …………………………………………………………………………………………10
3.2确定搭边值…………………………………………………………………………………………10
3.3确定排样图…………………………………………………………………………………………11
3.3.1排样方案  …………………………………………………………………………………11
3.3.2排样图  ……………………………………………………………………………………12
3.4材料的利用率 …………………………………………………………………………………  13
3.5凸、凹模等刃口尺寸的确定 …………………………………………………………………… 14
3.6冲压力计算 ……………………………………………………………………………………… 18
3.7压力机选用…………………………………………………………………………………………19
3.8压力中心计算………………………………………………………………………………………20
3.9主要零件的结构设计  ……………………………………………………………………………20
3.10标准件确定 ………………………………………………………………………………………21
3.11模具闭合高度、校验压力机 ……………………………………………………………………22

第四章  结论与展望
4.1结论 ……………………………………………………………………………………………… 23
4.2不足与致谢…………………………………………………………………………………………24
 
参考文献  ……………………………………………………………………………………25


参考文献
[1] 成虹. 冲压工艺与模具设计 .北京:高等教育出版社,2003.
[2] 齐卫东. 简明冲压模具设计手册.  北京:理工大学出版社
[3] 宋满仓.冲压模具设计[M].北京:电子出版社,2010.
[4] 汤酞则.冷冲模课程设计与毕业设计指导.湖南:湖南大学出版社,2008.
[5] 郑家贤.冲压模具设计实用手册[M].北京:机械工业出版社,2008.


http://www.bysj360.com/  http://www.bysj360.com/html/3298.html   http://www.bylw520.net


 

  • 关键词 蒸汽 滤阀片 冲模
  • 上一篇:基于SolidWorks的签字笔笔帽注塑模具设计
  • 下一篇:手机万能充电器塑料模具设计
  • 暂无购买记录

    暂时没有评论

    真实

    多重认证,精挑细选的优质资源 优质老师。

    安全

    诚实交易,诚信为本。

    保密

    所有交易信息,都为您保密。

    专业

    10年专业经验,10年来帮助无数学子。