管虎钳组合件三维建模、数控加工工艺及编程

管虎钳组合件三维建模、数控加工工艺及编程

管虎钳组合件三维建模、数控加工工艺及编程

  • 适用:本科,大专,自考
  • 更新时间2024年
  • 原价: ¥312
  • 活动价: ¥200 (活动截止日期:2024-03-31)
  • (到期后自动恢复原价)
管虎钳组合件三维建模、数控加工工艺及编程

管虎钳组合件三维建模、数控加工工艺及编程
摘要:机床夹具是机床上的一种装置,用以装夹工件和引导刀具。它的作用是将工件定位,以使工件相对于机床和刀具获得正确的位置,并把工件可靠地夹紧、紧固。在现代生产中,机床夹具是一种不可缺少的工艺装备,它直接影响到机械制造加工工艺的精度、劳动生产率和产品制造成本等,故机床夹具设计在企业的产品设计和制造以及生产技术准备中占有着及其重要的地位。本次以研究用来夹稳金属管,以便进行绞制螺纹或割断等工作的专用夹具。
目前管子台虎钳的种类有很多,本次主要研究桌面式管虎钳。采用多功能模块设计,主要由加力杆、上下V块、夹头、螺杆、横梁、支柱、左右支座、底座、钳架等组成。手动旋转加力杆,带动螺杆旋转,从而带动上V形相对于钳架做轴向移动,以起到夹紧或放松的作用。以坚固的钢球支撑,采用合金钢钳口,以保证管子台虎钳用足够的加紧强度,使其夹持件不得转动。
本文是多个零件加工工艺的设计,其主要内容包括零件的工艺性分析、零件结构工艺性分析、工艺路线的设计、合理的选择刀具、参数的选用、数控加工程序的编制。掌握数控加工的加工工艺与程序编制的基本理论知识,科学的、最优的设计出数控加工工艺和加工程序,充分发挥数控机床的特点,实现在数控加工中产品的优劣、高产和低耗。
关键词:桌面式虎钳,夹持金属管,工艺分析,加工程序编制

Pipe vise assembly 3D modeling, CNC machining technology and programming
Abstract:Machine tool fixture is a machine tool for clamping workpiece and guide tool on a device. It is the role of the workpiece positioning, in order to make the artifact to obtain relative to the correct position of the machine tools and cutting tools, and the workpiece clamping, fastening in a reliable way. In the modern production, machine tool fixture is a kind of indispensable process equipment, it directly affects the precision of machinery manufacturing processing technology, labor productivity and manufacturing cost etc., so the machine tool fixture design in the enterprise product design and manufacturing and production technology to prepare holds and its important position. This study used for metal pipe clamped for stranding thread or cut out special fixture, etc.
At present there are a lot of the kinds of pipe vise, the main research desktop type tube vice. Adopt multi-function module design, is mainly composed of torque rod, V block up and down, clamp, screw, beams and pillars, about bearing, base, pliers, etc. Manual rotation torque rod, drive screw rotation, thus promote the V form for axial moving clamp frame do, to play the role of tight or loose). With solid steel support, which adopts pucellas mouth, to ensure that the pipe vise with enough to strength, make the clamping piece can not turn.
This paper is the design of the multiple parts processing technology, its main content including part manufacturability analysis, parts molding process analysis, process route design, the reasonable choice of cutting tool, parameter selection, the preparation of the nc machining program. Master the nc machining process and the basic theory of programming knowledge, scientific, the optimal design of nc machining process and processing procedures, give full play to the characteristics of nc machine tools, implementation in the nc machining quality, high productivity and low consumption of the product.
Keywords: Desktop vise, holding a metal pipe, process analysis, process programming 
目录

第一章 绪论 9
 1.1课题研究的意义 9
 1.2管虎钳的介绍 10
 1.3课题研究的主要内容 11
第二章管虎钳零件的三维造型与装配 12
 2.1UG软件使用方法介绍 12
 2.2零件三维图绘制 13
 2.3零件的装配 16
第三章虎钳底座零件的数控加工工艺规程的设计 19
 3.1零件图 19
 3.2零件结构工艺性分析 19
3.2.1零件技术要求分析 19
 3.3毛坯种类、形状、尺寸的确定 20
 3.4零件各表面加工方法及加工机床与装夹方案的确定 21
3.4.1零件各表面加工方法的选择 21
3.4.2加工机床与装夹方案的确定 21
 3.5加工顺序的确定 22
 3.6走刀路线的确定及刀具的选择 23
 3.7加工工艺路线的确定 24
 3.8加工余量、工序尺寸及公差的确定 25
 3.9切削用量的确定 26
第四章管虎钳螺杆零件数控编程 27
第五章总结与致谢 31
 5.1总结 31
 5.2致谢 31
参考文献 32
毕业设计附录目录: 33

参考文献
[1]薛源顺,机床夹具设计[M].机械工业出版社,2011
[2]周晓宏,数控加工工艺[M].机械工业出版社,2010.9
[3]汪蓉青、邱建忠,数控加工工艺[M].化学工业出版社,2010.7
[4]刘坚,数控加工与编程[M].北京航空航天大学出版社,2009.8
[5]金波,典型零件测量与计算机绘图[M].科学出版社,2009
[6]倪森寿,机械制造工艺与装备[M].化学工业出版社,2009.1
[7]邓英剑、杨东生,公差配合与测量技术[M].国防工业出版社,2007.3
[8]展迪优,UG NX 8.0快速入门教程[M].机械工业出版社,2012.1
[9]唐文献,数控机床加工工艺入门与提高[M].机械工业出版社,2013.2
[10]吴京霞,典型零件数控加工[M].北京航空航天大学出版社,2012.8

 

 

 

http://www.bysj360.com/html/6486.html
http://www.bysj360.com/html/6469.html
http://www.bysj360.com/html/6483.html

  • 关键词 虎钳 组合 三维 建模 数控加工 工艺 编程
  • 上一篇:滑轮手柄数控加工工艺设计与编程
  • 下一篇:基于数控车铣的十字头3D工艺设计
  • 暂无购买记录

    暂时没有评论

    真实

    多重认证,精挑细选的优质资源 优质老师。

    安全

    诚实交易,诚信为本。

    保密

    所有交易信息,都为您保密。

    专业

    10年专业经验,10年来帮助无数学子。