CA6140手柄座工艺规程及钻14孔夹具设计
摘 要
本设计针对手柄座的生产技术特点,综述了制造技术及其装备的主要问题,重点分析介绍工艺流程、工艺基准的关键作用,变形对加工精度的影响,检测技术配套及手柄座的工作环境和受力情况等关键问题的设计说明。
及其手柄座的机加工工艺流程和在加工过程中的专用夹具设计。通过设计使我们更进一步熟悉了产品加工设计的全过程,在制定加工方案的时候,充分考虑其经济性和可行性。
关键字:手柄座; 工艺; 夹具
ABSTRACT
The design of the production seat for the technical characteristics of the handle, manufacturing technology and equipment are reviewed the main issues, the focus of introduction process, the key role of process benchmarking, the impact of deformation on the machining accuracy, detection technology and supporting the work environment and handle seat key issues such as the forces of the design specification.
And handle seat machining process and in the process of the special fixture design. Further through the design so that we are familiar with the whole process of product design and processing, in the development of processing program, the full account of its economic and feasibility.
Key Block Handle ; craft; jig
目 录
第一章 前言 1
第二章 零件的分析 8
2.1计算生产纲领,确定生产类型 2
2.2零件的作用 2
2.3零件的工艺分析 2
第三章 工艺规程设计 4
3.1确定毛坯的制造形式 4
3.2基面的选择 4
3.2.1粗基准的选择 4
3.2.2精基准的选择 4
3.3制定工艺路线 4
3.4机械加工余量、工序尺寸及毛皮尺寸的确定 6
3.5确立切削用量及基本工时 7
第四章 专用夹具设计 17
4.1任务的提出 17
4.2定位方案及定位装置的设计计算 17
4.3对刀或导引元件(装置)设计 17
4.4夹紧方案及装置的设计计算 18
4.5夹紧机构及装置设计 18
4.6夹具操作及维护简要说明 18
结论 20
参考文献 21
致谢 22
参考资料
1.《机床夹具设计》 第2版 肖继德 陈宁平主编 机械工业出版社
2.《机械制造工艺及专用夹具设计指导》 孙丽媛主编 冶金工业出版社
3.《机械制造工艺学》周昌治、杨忠鉴等 重庆大学出版社
4.《机械制造工艺设计简明手册》李益民 主编 机械工业出版社
5.《工艺师手册》 杨叔子主编 机械工业出版社
6.《机床夹具设计手册》王光斗、王春福主编 上海科技出版社
7.《机床专用夹具设计图册》南京市机械研究所 主编 机械工业出版社
8.《机械原理课程设计手册》 邹慧君主编 机械工业出版社
9.《金属切削手册》第三版 上海市金属切削技术协会 上海科学技术出版社
10.《几何量公差与检测》第五版 甘永立 主编 上海科学技术出版社
11.《机械制造工艺水学》、《机床夹具设计》(教材)
12.《机械制造工艺学课程设计指导书》 ,机械工业出版社
http://www.bylw520.net/html/2247.html http://www.bysj360.com/ http://www.bysj360.com/html/1248.html http://www.caddown.com/